Linearer Modus

Hexley · 14.09.2012 16:30

**CDW** · 14.09.2012 16:35

(14.09.2012 16:30)Batch10s schrieb:

Der Dateiname :trollface:

Hexley · 14.09.2012 16:41

(14.09.2012 16:35)CDW schrieb: Der Dateiname

14.09.2012 18:00

lol-guy.jpg

das war langweilig

HOMEBOY87 · 15.09.2012 16:55

788 bzw. 755 Tage reine Laufzeit später..

[Bild: WD2500AVJB.jpg]

30°C bei einem 120mm Miefquirl auf 5V. Und die WD2500AVJB is ne 7200er..
Frag mich da manchmal ernsthaft, wie manche Leute (teils deutlich) über 40°C hinkriegen (mit Ausnahme derer vollidioten, die ihre Platten garnicht kühlen..). Also allgemein.. nich nur hier auf den Fred bezogen.

Tarvenik · 15.09.2012 19:12

Momentan nicht so gut, meine Western Digital mit 40 GB lässt die Windows Installation nicht zu. Vl liegts daran dass Ubuntu zuvor drauf war....

**CDW** · 15.09.2012 19:13

(15.09.2012 16:55)HOMEBOY87 schrieb: 788 bzw. 755 Tage reine Laufzeit später..

30°C bei einem 120mm Miefquirl auf 5V. Und die WD2500AVJB is ne 7200er..
Frag mich da manchmal ernsthaft, wie manche Leute (teils deutlich) über 40°C hinkriegen (mit Ausnahme derer vollidioten, die ihre Platten garnicht kühlen..). Also allgemein.. nich nur hier auf den Fred bezogen.

Ich kühl meine auch nicht. 32C°

akino_germany · 02.10.2012 15:53

Fuexline · 02.10.2012 16:06

**Xaar** · 20.10.2012 07:38

Die Toshiba MK4025GAS im ThinkPad 570E:

Code:

smartctl 5.41 2011-03-16 r3296 [i686-pc-linux-gnu-2.6.38-grml] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Toshiba 2.5" HDD series (30-60 GB) Device Model: TOSHIBA MK4025GAS Serial Number: X3683095S Firmware Version: KA100A User Capacity: 40.007.761.920 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Sat Oct 20 08:29:00 2012 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 189) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 37) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 744 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 5728 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 365 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 086 086 000 Old_age Always - 5626 10 Spin_Retry_Count 0x0033 214 100 030 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 4314 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 153 193 Load_Cycle_Count 0x0032 079 079 000 Old_age Always - 217199 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 32 (Min/Max 7/59) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 43 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 51 222 Loaded_Hours 0x0032 092 092 000 Old_age Always - 3459 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 138 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Device does not support Selective Self Tests/Logging

Schaut jetzt nicht wirklich vertrauenswürdig aus..

Und hinterher noch die Hitachi IC25N030ATMR04-0 im ThinkPad T23:

Code:

smartctl 5.41 2011-06-09 r3365 [i686-linux-3.3.0-3-grml-486] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Hitachi Travelstar 80GN Device Model: IC25N030ATMR04-0 Serial Number: MRG2A6K2GP7JBJ Firmware Version: MOAOAD0A User Capacity: 30.005.821.440 bytes [30,0 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 3a Local Time is: Sat Oct 20 08:31:19 2012 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 645) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 37) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0 2 Throughput_Performance 0x0005 104 104 040 Pre-fail Offline - 5921 3 Spin_Up_Time 0x0007 153 153 033 Pre-fail Always - 1 4 Start_Stop_Count 0x0012 099 099 000 Old_age Always - 1812 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 107 107 040 Pre-fail Offline - 42 9 Power_On_Hours 0x0012 084 084 000 Old_age Always - 7109 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1600 191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 51 193 Load_Cycle_Count 0x0012 077 077 000 Old_age Always - 238825 194 Temperature_Celsius 0x0002 137 137 000 Old_age Always - 40 (Min/Max 13/65) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 1 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 2 CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2 occurred at disk power-on lifetime: 6334 hours (263 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 10 51 00 40 3e 7e e3 Error: IDNF at LBA = 0x037e3e40 = 58605120 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 30 ff 01 40 3e 7e e3 00 03:48:48.400 WRITE SECTOR(S) ca ff 01 40 3e 7e e3 00 03:48:48.300 WRITE DMA ca ff 40 00 3e 7e e3 00 03:48:48.300 WRITE DMA ca ff 40 c0 3d 7e e3 00 03:48:48.300 WRITE DMA ca ff 40 80 3d 7e e3 00 03:48:48.300 WRITE DMA Error 1 occurred at disk power-on lifetime: 6334 hours (263 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 10 51 00 40 3e 7e e3 Error: IDNF at LBA = 0x037e3e40 = 58605120 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ca ff 01 40 3e 7e e3 00 03:48:48.300 WRITE DMA ca ff 40 00 3e 7e e3 00 03:48:48.300 WRITE DMA ca ff 40 c0 3d 7e e3 00 03:48:48.300 WRITE DMA ca ff 40 80 3d 7e e3 00 03:48:48.300 WRITE DMA ca ff 40 40 3d 7e e3 00 03:48:48.300 WRITE DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 6229 - # 2 Short offline Completed without error 00% 1 - # 3 Short captive Completed without error 00% 0 - Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

Das sieht schon deutlich besser aus