Neue Antwort schreiben 
 
Themabewertung:
  • 0 Bewertung(en) - 0 im Durchschnitt
  • 1
  • 2
  • 3
  • 4
  • 5
Raspberry Pi 4 ist raus
Blue Offline
Original Vistaman™

Beiträge: 20.250
Registriert seit: Jul 2008
Beitrag #11
RE: Raspberry Pi 4 ist raus
Code:
pi@raspberrypi:~ $ dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.19.50-v7l+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #895 SMP Thu Jun 20 16:03:42 BST 2019
[    0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.1
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] cma: Reserved 256 MiB at 0x000000001ec00000
[    0.000000] On node 0 totalpages: 504832
[    0.000000]   DMA zone: 1728 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 196608 pages, LIFO batch:63
[    0.000000]   HighMem zone: 308224 pages, LIFO batch:63
[    0.000000] random: get_random_bytes called from start_kernel+0xc0/0x4e8 with crng_init=0
[    0.000000] percpu: Embedded 17 pages/cpu s39488 r8192 d21952 u69632
[    0.000000] pcpu-alloc: s39488 r8192 d21952 u69632 alloc=17*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 503104
[    0.000000] Kernel command line: 8250.nr_uarts=0 cma=64M cma=256M  smsc95xx.macaddr=DC:A6:32:01:E2:89 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=e3c4cc00-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 1721840K/2019328K available (8192K kernel code, 658K rwdata, 2344K rodata, 2048K init, 850K bss, 35344K reserved, 262144K cma-reserved, 1232896K highmem)
[    0.000000] Virtual kernel memory layout:
                   vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                   fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                   vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
                   lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
                   pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
                   modules : 0xbf000000 - 0xbfe00000   (  14 MB)
                     .text : 0x(ptrval) - 0x(ptrval)   (10208 kB)
                     .init : 0x(ptrval) - 0x(ptrval)   (2048 kB)
                     .data : 0x(ptrval) - 0x(ptrval)   ( 659 kB)
                      .bss : 0x(ptrval) - 0x(ptrval)   ( 851 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 28034 entries in 83 pages
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[    0.000005] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[    0.000021] Switching to timer-based delay loop, resolution 18ns
[    0.000248] Console: colour dummy device 80x30
[    0.000734] console [tty1] enabled
[    0.000785] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000)
[    0.000828] pid_max: default: 32768 minimum: 301
[    0.001100] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001133] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001893] CPU: Testing write buffer coherency: ok
[    0.002313] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.002951] Setting up static identity map for 0x200000 - 0x20003c
[    0.003123] rcu: Hierarchical SRCU implementation.
[    0.003990] smp: Bringing up secondary CPUs ...
[    0.004889] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.005896] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.006866] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.006999] smp: Brought up 1 node, 4 CPUs
[    0.007068] SMP: Total of 4 processors activated (432.00 BogoMIPS).
[    0.007091] CPU: All CPU(s) started in HYP mode.
[    0.007111] CPU: Virtualization extensions available.
[    0.007906] devtmpfs: initialized
[    0.017671] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0
[    0.017905] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.017947] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.025268] pinctrl core: initialized pinctrl subsystem
[    0.026134] NET: Registered protocol family 16
[    0.028618] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.029903] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.029970] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.030171] Serial: AMBA PL011 UART driver
[    0.033252] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[    0.068611] bcm2835-dma fe007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1
[    0.070863] vgaarb: loaded
[    0.071241] SCSI subsystem initialized
[    0.071450] usbcore: registered new interface driver usbfs
[    0.071516] usbcore: registered new interface driver hub
[    0.071629] usbcore: registered new device driver usb
[    0.090374] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-06-20 16:04, variant start
[    0.100117] raspberrypi-firmware soc:firmware: Firmware hash is 407b1da8fa3d1a7108cb1d250f5064a3420d2b7d
[    0.111467] clocksource: Switched to clocksource arch_sys_counter
[    0.188280] VFS: Disk quotas dquot_6.6.0
[    0.188376] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.188539] FS-Cache: Loaded
[    0.188726] CacheFiles: Loaded
[    0.189243] simple-framebuffer: probe of 0.framebuffer failed with error -12
[    0.198385] NET: Registered protocol family 2
[    0.199050] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[    0.199095] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.199177] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.199261] TCP: Hash tables configured (established 8192 bind 8192)
[    0.199393] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.199437] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.199741] NET: Registered protocol family 1
[    0.200280] RPC: Registered named UNIX socket transport module.
[    0.200306] RPC: Registered udp transport module.
[    0.200328] RPC: Registered tcp transport module.
[    0.200349] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.200377] PCI: CLS 0 bytes, default 64
[    0.203349] Initialise system trusted keyrings
[    0.203562] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[    0.212329] FS-Cache: Netfs 'nfs' registered for caching
[    0.212838] NFS: Registering the id_resolver key type
[    0.212877] Key type id_resolver registered
[    0.212899] Key type id_legacy registered
[    0.212930] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.215143] Key type asymmetric registered
[    0.215170] Asymmetric key parser 'x509' registered
[    0.215292] bounce: pool size: 64 pages
[    0.215341] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.215518] io scheduler noop registered
[    0.215542] io scheduler deadline registered (default)
[    0.215696] io scheduler cfq registered
[    0.215718] io scheduler mq-deadline registered (default)
[    0.215741] io scheduler kyber registered
[    0.218589] brcm-pcie fd500000.pcie: could not get clock
[    0.218663] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[    0.218715] brcm-pcie fd500000.pcie:   MEM 0x600000000..0x603ffffff -> 0xf8000000
[    0.271501] brcm-pcie fd500000.pcie: link up, 5.0 Gbps x1 (!SSC)
[    0.271770] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[    0.271800] pci_bus 0000:00: root bus resource [bus 00-01]
[    0.271831] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
[    0.271894] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[    0.272030] pci 0000:00:00.0: PME# supported from D0 D3hot
[    0.274686] PCI: bus0: Fast back to back transfers disabled
[    0.274718] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.274901] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[    0.274961] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.275129] pci 0000:01:00.0: PME# supported from D0 D3cold
[    0.277676] PCI: bus1: Fast back to back transfers disabled
[    0.277706] pci_bus 0000:01: busn_res: [bus 01] end is updated to 01
[    0.277751] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[    0.277785] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[    0.277833] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.277863] pci 0000:00:00.0:   bridge window [mem 0x600000000-0x6000fffff]
[    0.277934] pci 0000:00:00.0: enabling device (0140 -> 0142)
[    0.277971] pci 0000:01:00.0: enabling device (0140 -> 0142)
[    0.281112] iproc-rng200 fe104000.rng: hwrng registered
[    0.281342] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[    0.281884] vc-sm: Videocore shared memory driver
[    0.282284] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[    0.292248] brd: module loaded
[    0.301714] loop: module loaded
[    0.302459] Loading iSCSI transport class v2.0-870.
[    0.304091] libphy: Fixed MDIO Bus: probed
[    0.304528] bcmgenet fd580000.genet: failed to get enet clock
[    0.304559] bcmgenet fd580000.genet: GENET 5.0 EPHY: 0x0000
[    0.304590] bcmgenet fd580000.genet: failed to get enet-wol clock
[    0.304619] bcmgenet fd580000.genet: failed to get enet-eee clock
[    0.304881] unimac-mdio unimac-mdio.-19: DMA mask not set
[    0.321504] libphy: bcmgenet MII bus: probed
[    0.361991] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus at 0x(ptrval)
[    0.362902] usbcore: registered new interface driver r8152
[    0.362976] usbcore: registered new interface driver lan78xx
[    0.363044] usbcore: registered new interface driver smsc95xx
[    0.363313] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    0.363357] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[    0.364705] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000000000000890
[    0.364886] genirq: irq_chip Brcm_MSI did not update eff. affinity mask of irq 55
[    0.365513] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    0.365548] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.365577] usb usb1: Product: xHCI Host Controller
[    0.365601] usb usb1: Manufacturer: Linux 4.19.50-v7l+ xhci-hcd
[    0.365625] usb usb1: SerialNumber: 0000:01:00.0
[    0.366134] hub 1-0:1.0: USB hub found
[    0.366199] hub 1-0:1.0: 1 port detected
[    0.366614] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    0.366649] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[    0.366685] xhci_hcd 0000:01:00.0: Host supports USB 3.0  SuperSpeed
[    0.367042] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[    0.367075] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.367104] usb usb2: Product: xHCI Host Controller
[    0.367127] usb usb2: Manufacturer: Linux 4.19.50-v7l+ xhci-hcd
[    0.367150] usb usb2: SerialNumber: 0000:01:00.0
[    0.367648] hub 2-0:1.0: USB hub found
[    0.367715] hub 2-0:1.0: 4 ports detected
[    0.368810] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    0.394386] dwc_otg fe980000.usb: base=(ptrval)
[    0.594715] Core Release: 2.80a
[    0.594751] Setting default values for core params
[    0.594794] Finished setting default values for core params
[    0.795139] Using Buffer DMA mode
[    0.795163] Periodic Transfer Interrupt Enhancement - disabled
[    0.795185] Multiprocessor Interrupt Enhancement - disabled
[    0.795208] OTG VER PARAM: 0, OTG VER FLAG: 0
[    0.795279] Dedicated Tx FIFOs mode
[    0.795765] WARN::dwc_otg_hcd_init:1045: FIQ DMA bounce buffers: virt = dec70000 dma = 0x00000000dec70000 len=9024
[    0.795813] FIQ FSM acceleration enabled for :
               Non-periodic Split Transactions
               Periodic Split Transactions
               High-Speed Isochronous Endpoints
               Interrupt/Control Split Transaction hack enabled
[    0.795875] dwc_otg: Microframe scheduler enabled
[    0.795928] WARN::hcd_init_fiq:457: FIQ on core 1
[    0.795958] WARN::hcd_init_fiq:458: FIQ ASM at c07add50 length 36
[    0.795988] WARN::hcd_init_fiq:497: MPHI regs_base at f0810200
[    0.796038] dwc_otg fe980000.usb: DWC OTG Controller
[    0.796082] dwc_otg fe980000.usb: new USB bus registered, assigned bus number 3
[    0.796133] dwc_otg fe980000.usb: irq 36, io mem 0x00000000
[    0.796198] Init: Port Power? op_state=1
[    0.796219] Init: Power Port (0)
[    0.796495] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    0.796529] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.796558] usb usb3: Product: DWC OTG Controller
[    0.796582] usb usb3: Manufacturer: Linux 4.19.50-v7l+ dwc_otg_hcd
[    0.796606] usb usb3: SerialNumber: fe980000.usb
[    0.797134] hub 3-0:1.0: USB hub found
[    0.797198] hub 3-0:1.0: 1 port detected
[    0.797795] dwc_otg: FIQ enabled
[    0.797804] dwc_otg: NAK holdoff enabled
[    0.797813] dwc_otg: FIQ split-transaction FSM enabled
[    0.797826] Module dwc_common_port init
[    0.798041] usbcore: registered new interface driver uas
[    0.798166] usbcore: registered new interface driver usb-storage
[    0.798346] mousedev: PS/2 mouse device common for all mice
[    0.799526] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[    0.799739] bcm2835-cpufreq: min=600000 max=1500000
[    0.800349] sdhci: Secure Digital Host Controller Interface driver
[    0.800373] sdhci: Copyright(c) Pierre Ossman
[    0.800761] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
[    0.801145] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.804150] ledtrig-cpu: registered to indicate activity on CPUs
[    0.804314] hidraw: raw HID events driver (C) Jiri Kosina
[    0.804470] usbcore: registered new interface driver usbhid
[    0.804493] usbhid: USB HID core driver
[    0.805215] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0
[    0.806817] [vc_sm_connected_init]: start
[    0.814818] [vc_sm_connected_init]: end - returning 0
[    0.815781] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[    0.815811] [vc_sm_connected_init]: start
[    0.816150] [vc_sm_connected_init]: installed successfully
[    0.816469] Initializing XFRM netlink socket
[    0.816510] NET: Registered protocol family 17
[    0.816612] Key type dns_resolver registered
[    0.816908] Registering SWP/SWPB emulation handler
[    0.817515] registered taskstats version 1
[    0.817544] Loading compiled-in X.509 certificates
[    0.825212] uart-pl011 fe201000.serial: cts_event_workaround enabled
[    0.825295] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 33, base_baud = 0) is a PL011 rev2
[    0.828238] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[    0.828742] brcmstb_thermal fd5d2200.thermal: registered AVS TMON of-sensor driver
[    0.829374] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[    0.829401] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[    0.854610] sdhci-iproc fe340000.emmc2: Linked as a consumer to regulator.1
[    0.871907] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    0.873544] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    0.875304] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    0.878231] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    0.879870] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    0.886532] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
[    0.889219] of_cfs_init
[    0.889413] of_cfs_init: OK
[    0.890074] Waiting for root device PARTUUID=e3c4cc00-02...
[    0.922595] mmc0: Problem switching card into high-speed mode!
[    0.922822] mmc0: new SDHC card at address 0001
[    0.923995] mmcblk0: mmc0:0001 ASTC 7.45 GiB
[    0.924545] random: fast init done
[    0.926463]  mmcblk0: p1 p2
[    0.941538] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    0.943253] mmc1: new high speed SDIO card at address 0001
[    0.960207] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    0.960270] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    0.977209] devtmpfs: mounted
[    0.983670] Freeing unused kernel memory: 2048K
[    1.001724] Run /sbin/init as init process
[    1.122669] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.20
[    1.122710] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.122738] usb 1-1: Product: USB2.0 Hub
[    1.124224] hub 1-1:1.0: USB hub found
[    1.124491] hub 1-1:1.0: 4 ports detected
[    2.272473] systemd[1]: System time before build time, advancing clock.
[    2.497396] NET: Registered protocol family 10
[    2.498627] Segment Routing with IPv6
[    2.564079] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    2.564796] systemd[1]: Detected architecture arm.
[    2.580323] systemd[1]: Set hostname to <raspberrypi>.
[    3.074345] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[    3.074407] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[    3.625205] random: systemd: uninitialized urandom read (16 bytes read)
[    3.633096] random: systemd: uninitialized urandom read (16 bytes read)
[    3.633483] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    3.634222] random: systemd: uninitialized urandom read (16 bytes read)
[    3.634533] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    3.639998] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    3.641007] systemd[1]: Listening on udev Control Socket.
[    3.642327] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.604425] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    4.695720] systemd-journald[102]: Received request to flush runtime journal from PID 1
[    5.468647] argon-mem feb00000.hevc-decoder: argon-hevcmem initialised: Registers at 0xfeb00000 length 0x0000ffff
[    5.469097] argon-mem feb10000.argon-local-intc: argon-intcmem initialised: Registers at 0xfeb10000 length 0x00000fff
[    5.469453] argon-mem feb20000.h264-decoder: argon-h264mem initialised: Registers at 0xfeb20000 length 0x0000ffff
[    5.469807] argon-mem feb30000.vp9-decoder: argon-vp9mem initialised: Registers at 0xfeb30000 length 0x0000ffff
[    5.776088] media: Linux media interface: v0.10
[    5.918662] videodev: Linux video capture interface: v2.00
[    5.959377] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[    5.967916] bcm2835_audio soc:audio: card created with 8 channels
[    6.108023] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    6.109204] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0
[    6.143968] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[    6.145908] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[    6.214805] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    6.229381] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[    6.248375] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[    6.255154] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[    6.255167] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[    6.257736] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[    6.257747] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[    6.260923] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[    6.260934] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[    6.376467] [drm] No displays found. Consider forcing hotplug if HDMI is attached
[    6.376560] vc4-drm soc:gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4])
[    6.377364] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 1
[    6.377375] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    6.377384] [drm] No driver support for vblank timestamp query.
[    6.377393] [drm] Setting vblank_disable_immediate to false because get_vblank_timestamp == NULL
[    6.408999] brcmfmac: F1 signature read @0x18000000=0x15264345
[    6.418385] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    6.419020] usbcore: registered new interface driver brcmfmac
[    6.707928] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    6.722559] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
[    8.730344] uart-pl011 fe201000.serial: no DMA platform data
[    8.736211] random: crng init done
[    8.736224] random: 7 urandom warning(s) missed due to ratelimiting
[    9.216055] 8021q: 802.1Q VLAN Support v1.8
[    9.564735] Adding 102396k swap on /var/swap.  Priority:-2 extents:1 across:102396k SSFS
[    9.620955] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    9.620962] brcmfmac: power management disabled
[   10.261720] bcmgenet fd580000.genet: configuring instance for external RGMII (no delay)
[   10.262010] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.271728] bcmgenet fd580000.genet eth0: Link is Down
[   15.431756] bcmgenet fd580000.genet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   15.431791] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   15.946509] Bluetooth: Core ver 2.22
[   15.946580] NET: Registered protocol family 31
[   15.946590] Bluetooth: HCI device and connection manager initialized
[   15.946611] Bluetooth: HCI socket layer initialized
[   15.946626] Bluetooth: L2CAP socket layer initialized
[   15.946669] Bluetooth: SCO socket layer initialized
[   15.969973] Bluetooth: HCI UART driver ver 2.3
[   15.969987] Bluetooth: HCI UART protocol H4 registeredpi@raspberrypi:~ $ lscpu
[   15.970067] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   15.970296] Bluetooth: HCI UART protocol Broadcom registered
[   16.375780] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   16.375786] Bluetooth: BNEP filters: protocol multicast
[   16.375796] Bluetooth: BNEP socket layer initialized

Code:
Architecture:        armv7l
Byte Order:          Little Endian
CPU(s):              4
On-line CPU(s) list: 0-3
Thread(s) per core:  1
Core(s) per socket:  4
Socket(s):           1
Vendor ID:           ARM
Model:               3
Model name:          Cortex-A72
Stepping:            r0p3
CPU max MHz:         1500.0000
CPU min MHz:         600.0000
BogoMIPS:            270.00
Flags:               half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32
pi@raspberrypi:~ $

Code:
pi@raspberrypi:~ $ lspci
00:00.0 PCI bridge: Broadcom Limited Device 2711 (rev 10)
01:00.0 USB controller: VIA Technologies, Inc. VL805 USB 3.0 Host Controller (rev 01)
pi@raspberrypi:~ $

ThinkPad X230 - i7-3520M - 16GB RAM - 500GB EVO 860 - Radeon R7 370 Expresscard eGPU - Dockingstation u. Sliceakku - Ubuntu
PowerBook G4 - 7448 1,67GHz - 2GB RAM - 120GB EVO 750 - Radeon 9700 - Debian
Opteron - 2419EE 12x1,8GHz - 64GB RAM - 250GB Intel SSD - Proxmox Virtual Enviroment
Homeserver - i5-3570K - 24GB RAM - 250GB Samsung 830 - 3x 6TB (RAID5) - 2x 4TB (JBOD) - Arch Linux

CDW ist love <3
[01:04] <drwho> I WILL DIE FOR DOSAMP
[01:04] <drwho> DOSAMP AKHBAR
26.06.2019 19:26
Webseite des Benutzers besuchen Alle Beiträge dieses Benutzers finden Diese Nachricht in einer Antwort zitieren
Retro92 Offline
Posting Freak

Beiträge: 3.668
Registriert seit: Feb 2013
Beitrag #12
RE: Raspberry Pi 4 ist raus
Und wieder nix gescheites zur Kühlung... Das starterkit scheint auch nix im Petto zu haben.
26.06.2019 20:04
Alle Beiträge dieses Benutzers finden Diese Nachricht in einer Antwort zitieren
Alpha Offline
Oskar

Beiträge: 15.588
Registriert seit: Jan 2009
Beitrag #13
RE: Raspberry Pi 4 ist raus
Wie ist eigentlich der Status mit Upstream? Wieviel ist beim Pi4 nun nicht Mainline?

Mark IV Style Motherfucker
(Dieser Beitrag wurde zuletzt bearbeitet: 26.06.2019 20:08 von Alpha.)
26.06.2019 20:08
Alle Beiträge dieses Benutzers finden Diese Nachricht in einer Antwort zitieren
Blue Offline
Original Vistaman™

Beiträge: 20.250
Registriert seit: Jul 2008
Beitrag #14
RE: Raspberry Pi 4 ist raus
Hab von GeeekPi diese Gehäuse mit Lüfter.. jetzt das vierte.

Mit bissel Cuttermesser oder dremel passt es auch fürs Pi 4
Aber ja das es offizell nix gibt isn lacher.. selbst mit Kühlung brät mir sowohl der Pi3 als auch der Pi4 bei 70 Grad rum bei 100% CPU. Wobei der Pi3 deutlich hitziger ist! Wird mehr und schneller heiß.

ThinkPad X230 - i7-3520M - 16GB RAM - 500GB EVO 860 - Radeon R7 370 Expresscard eGPU - Dockingstation u. Sliceakku - Ubuntu
PowerBook G4 - 7448 1,67GHz - 2GB RAM - 120GB EVO 750 - Radeon 9700 - Debian
Opteron - 2419EE 12x1,8GHz - 64GB RAM - 250GB Intel SSD - Proxmox Virtual Enviroment
Homeserver - i5-3570K - 24GB RAM - 250GB Samsung 830 - 3x 6TB (RAID5) - 2x 4TB (JBOD) - Arch Linux

CDW ist love <3
[01:04] <drwho> I WILL DIE FOR DOSAMP
[01:04] <drwho> DOSAMP AKHBAR
26.06.2019 20:09
Webseite des Benutzers besuchen Alle Beiträge dieses Benutzers finden Diese Nachricht in einer Antwort zitieren
Nik Offline
Offizieller Aufsichtsrat für Toastbrot

Beiträge: 1.793
Registriert seit: May 2012
Beitrag #15
RE: Raspberry Pi 4 ist raus
Hab letztens ein Case gesehen, welches den Pi komplett mit Kühlrippen umgibt und zwei Lüfter hat

Das ging tatsächlich recht gut (Pi 3), wurde auch mehr als Handwarm bei Last.

Edit: https://www.amazon.de/dp/B07GBV3D31/

"Mach das Licht entweder an oder aus, aber nicht beides gleichzeitig" - Nik, 2017
(Dieser Beitrag wurde zuletzt bearbeitet: 27.06.2019 19:06 von Nik.)
27.06.2019 19:01
Webseite des Benutzers besuchen Alle Beiträge dieses Benutzers finden Diese Nachricht in einer Antwort zitieren
freaked Offline
ILOVEBUNNY32=1

Beiträge: 13.835
Registriert seit: Jul 2008
Beitrag #16
RE: Raspberry Pi 4 ist raus
so jetzt isser da der pi 4 mit aktuellstem raspbian
youtube im chrome geht nur bis 1080p und es ruckelt
randomly picked 4k videos von 4ksamples.com spielen nicht ab mit omxplayer
was lief schief?

[Bild: freaked.banner.gif]
11.07.2019 17:51
Webseite des Benutzers besuchen Alle Beiträge dieses Benutzers finden Diese Nachricht in einer Antwort zitieren
Dirk Offline
Software Archäologe

Beiträge: 12.199
Registriert seit: Jul 2008
Beitrag #17
RE: Raspberry Pi 4 ist raus
garnichts. Hab in nen Podcast von ct gehört, dass die Unterstützung in Raspian schlicht noch nicht fertig ist. Die Treiber müssen wohl erst noch gestrickt werden, Chrome hat wohl auch keine Grafikbeschleunigung und da ist die Softwarecodierung zu lahm.

Der R4 hat wohl einige überrascht.

11.07.2019 18:07
Webseite des Benutzers besuchen Alle Beiträge dieses Benutzers finden Diese Nachricht in einer Antwort zitieren
Neue Antwort schreiben 


Gehe zu:


Benutzer, die gerade dieses Thema anschauen: 1 Gast/Gäste