Retro und doch immer noch aktuell.
Ist das n Rechner von dir?
Beiträge von tk1908
-
-
mach ich sobald ich zuhause bin
Hat aich da bei dir schon was getan, zwecks hochladen?
-
evtl.
Das Thinkpad X41T hab ich letztens für 150€ im Sofort Kauf gesehen such ich gleich mal raus..Oder muss es ein richtiges Tablet sein? Das wäre ja beides eig. viel genialer
Soweit ich ihn verstanden hatte, sollte es ein richtiges Tablet sein. Also mit Android.
Zumal ich vermute, dass er es auch als Tablet verwenden will, folglich evtl zum surfen auf dem Sofa, da istn X41 evtl etwas zu unhandlich.
P.S Ich lasse mich gerne korrigieren.
-
surface, oktoberWir werden sehen.
-
Hatte ich noch vergessen zu erwähnen: Ich will eigentlich 16GB Speicher, und eine vernünftige Bildschirmauflösung (kein 800x600).OK. Das wird schwierig. Ich würd offengestanden auch eher sparn.
freaked Ich glaube nicht Tim.
Just my two cents. -
Alles anzeigen
Tag,
da es jetzt offiziell ist, dass ich mein PlayBook, nachdem ich es zur Reparatur eingeschickt hatte, nicht wieder kriege, sondern lediglich den Kaufpreis zurückerstattet, bin ich nun auf der Suche nach einem neuen Gerät.
Die Preisgrenze liegt (leider) bei 150€ mit nur geringem Spielraum. Geräte die den Preis um mehr als ein paar € übersteigen fallen komplett und definitiv aus, kein "aber für 50€ mehr würdest du...", mehr Geld hab ich nicht über.Ob 7" oder 9/10" Gerät ist mir ziemlich gleich. Die 7" am Playbook waren nett, weil man es wirklich mal eben in die Tasche schmeißen konnte. Auf der anderen Seite hätte ich aber auch gegen ein bisschen mehr Diagonale nichts.
Auch wenn das bei dem geringen Budget sicherlich eine Herausforderung ist, möchte ich eigentlich keinen Plaste-Billigkrams.
Es sollte sich nicht ganz billig anfühlen und nicht komplett unterpowert sein, wie vermutlich die meisten Tablets im Billig-Segment. Auch sollte es, sofern es ein Android Gerät wird, entweder durch den Hersteller oder durch Cyanogenmod weiterhin mit Updates versorgt werden.
Auch sollte der Akku nicht nach 2-3 Stunden schlapp machen, sondern mich mindestens über den Tag bringen, ohne dass ich mir Gedanken machen muss.Gibt's da irgendwelche Geheimtipps?
Falls nicht, dann wird's eben wieder ein Playbook. Oder falls ich keins mehr zu dem Preis kriege ein paar Stadion-Besuche...http://www.amazon.de/gp/product/B00…ASIN=B005EJBHIQ
Würder 157€ kosten.
-
auf der warez seite deines vertrauns gibt es die
Gut dann warte ich halt noch ne Weile. Weiß jemand, wann die rauskommen wird?
-
mach ich sobald ich zuhause bin
Danke.
Würde es dann morgen im Laufe des Tages ziehen, wenn ich auf der Arbeit bin.Btw Weiß eigentlich jemand, wann die Final vom Server 2012 als Testversion verfügbar ist? Bei MS ist AFAIR nur die RC verfügbar.
-
lol warum?
Hängt mit unserem Proxy und der Firewall zusammen. Wenn jemand die Final auf nen Ftp hochladen würde, wäre das für mich kein Problem.
-
Habe mal wieder an Windows 8 rumgebastelt. Endlich ist nun wieder ein ordentliches Startmenü ohne Transparenz vorhanden. Und diese komische Seitenleiste am rechten Rand mit Metroscheiße ("Charms") ist nun auch weg
Ich werds mir wohl bei Gelegenheit auch mal ziehen. Geht leider hier in der Firma net, da wir bei http durch unseren Squid Proxy nur maximal 2gb ziehen können.
-
Also ich finde mein T61 recht gut. Ist leider mein bisher erstes und einziges Lenovo Produkt.
-
Es gibt ja zwei NTFS-Implementierungen unter Linux. Eine ist bereits im Kernel integriert. Sie ermöglicht zwar keinen Schreibzugriff, aber ein Lesezugriff auf den Stick sollte möglich sein. Wird der Stick denn an Windows-Rechnern erkannt?Zusätzlich gibt es noch die Implementierung ntfs-3g. Sie läuft im Userspace. Dadurch ist sie langsamer als die des Kernels. Dafür kann ntfs-3g aber Schreibzugriff.
Probier mal die Installation des Paketes ntfs-3g und versuche anschließend mount /dev/sdb1 /mnt -t ntfs-3g -o forcentfs-3g ist ja drauf. Mir geht es darum, dass der Stick quasi automatisch gemounted wird, wie an meinem Hauptrechner.
Alles anzeigen
Hallo Leute,
ich habe ein merkwürdiges Problem: Immer wenn ich einen Usb-Stick anstecke, sehe ich eine Fehlermeldung.
"Error mounting: mount exited with exit code 1: helper failed with:
mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so"
Könnte am ntfs Dateisystem liegen.
Kann es evtl ein fehlendes Paket sein?dmesg:
Spoiler anzeigen
[ 8.822552] iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 8.822573] iwl3945 0000:03:00.0: setting latency timer to 64
[ 8.895258] iwl3945 0000:03:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 8.895265] iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 8.895433] iwl3945 0000:03:00.0: irq 32 for MSI/MSI-X
[ 9.119719] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 9.175761] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 9.178640] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 9.179846] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 9.180862] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 9.182178] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 9.196898] [drm] initialized overlay support
[ 9.684978] Console: switching to colour frame buffer device 160x50
[ 9.696674] fb0: inteldrmfb frame buffer device
[ 9.696679] registered panic notifier
[ 9.702363] acpi device:01: registered as cooling_device2
[ 9.703466] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 9.703572] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 9.703679] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 9.703759] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 9.703768] hda_intel: probe_mask set to 0x1 for device 17aa:20ac
[ 9.703824] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 10.150335] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 11.144504] Adding 3969016k swap on /dev/sda5. Priority:-1 extents:1 across:3969016k
[ 11.403010] EXT3 FS on sda1, internal journal
[ 11.557893] loop: module loaded
[ 11.650890] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 12.795171] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 13.020069] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input9
[ 13.100623] fuse init (API version 7.13)
[ 14.732418] RPC: Registered udp transport module.
[ 14.732424] RPC: Registered tcp transport module.
[ 14.732429] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 15.056724] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 15.269845] svc: failed to register lockdv1 RPC service (errno 97).
[ 15.272504] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 15.305804] NFSD: starting 90-second grace period
[ 15.383354] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input10
[ 16.327463] apm: BIOS not found.
[ 16.955003] Bluetooth: L2CAP ver 2.14
[ 16.955009] Bluetooth: L2CAP socket layer initialized
[ 17.124064] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.124071] Bluetooth: BNEP filters: protocol multicast
[ 17.219585] Bridge firewalling registered
[ 17.685111] Bluetooth: RFCOMM TTY layer initialized
[ 17.685121] Bluetooth: RFCOMM socket layer initialized
[ 17.685126] Bluetooth: RFCOMM ver 1.11
[ 17.686921] Bluetooth: SCO (Voice Link) ver 0.6
[ 17.686926] Bluetooth: SCO socket layer initialized
[ 20.094430] lp: driver loaded but no devices found
[ 20.148839] ppdev: user-space parallel port driver
[ 29.363814] iwl3945 0000:03:00.0: firmware: requesting iwlwifi-3945-2.ucode
[ 29.540641] iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9
[ 29.610843] Registered led device: iwl-phy0::radio
[ 29.610889] Registered led device: iwl-phy0::assoc
[ 29.610934] Registered led device: iwl-phy0::RX
[ 29.610971] Registered led device: iwl-phy0::TX
[ 29.623003] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 35.597416] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[ 35.653143] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[ 35.653712] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 85.789160] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 85.789170] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 85.789665] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 95.836237] eth0: no IPv6 routers present
[ 121.401719] Registered led device: iwl-phy0::radio
[ 121.401765] Registered led device: iwl-phy0::assoc
[ 121.401806] Registered led device: iwl-phy0::RX
[ 121.401846] Registered led device: iwl-phy0::TX
[ 121.434492] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 122.128638] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[ 122.184355] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[ 122.184909] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 122.792479] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[ 122.848209] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[ 122.848743] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 124.185160] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 124.185169] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 124.185665] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 135.065032] eth0: no IPv6 routers present
[11035.323802] Monitor-Mwait will be used to enter C-3 state
[30783.916222] usb 3-1: USB disconnect, address 2
[30783.916513] btusb_intr_complete: hci0 urb f6339d80 failed to resubmit (19)
[30783.916533] btusb_bulk_complete: hci0 urb f6339000 failed to resubmit (19)
[30783.917519] btusb_bulk_complete: hci0 urb f6339300 failed to resubmit (19)
[30783.917984] btusb_send_frame: hci0 urb f5d36a80 submission failed
[30784.773861] Registered led device: iwl-phy0::radio
[30784.774150] Registered led device: iwl-phy0::assoc
[30784.774218] Registered led device: iwl-phy0::RX
[30784.774418] Registered led device: iwl-phy0::TX
[30784.810573] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[30785.533412] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[30785.589144] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[30785.589697] ADDRCONF(NETDEV_UP): eth0: link is not ready
[30785.827942] Registered led device: iwl-phy0::radio
[30785.827961] Registered led device: iwl-phy0::assoc
[30785.828037] Registered led device: iwl-phy0::RX
[30785.828053] Registered led device: iwl-phy0::TX
[30785.841890] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[30786.489393] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[30786.545150] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[30786.545687] ADDRCONF(NETDEV_UP): eth0: link is not ready
[30787.881909] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[30787.881912] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[30787.882097] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[30788.069629] PM: Marking nosave pages: 000000000009d000 - 0000000000100000
[30788.069634] PM: Basic memory bitmaps created
[30788.069635] PM: Syncing filesystems ... done.
[30788.088477] Freezing user space processes ... (elapsed 0.00 seconds) done.
[30788.089146] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[30788.089211] PM: Preallocating image memory...
[30798.040047] eth0: no IPv6 routers present
[30812.553181] e1000e: eth0 NIC Link is Down
[30820.247253] done (allocated 372544 pages)
[30820.247257] PM: Allocated 1490176 kbytes in 32.15 seconds (46.35 MB/s)
[30820.247259] Suspending console(s) (use no_console_suspend to debug)
[30820.885048] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[30820.886268] ACPI handle has no context!
[30820.886276] sdhci-pci 0000:15:00.2: PCI INT C disabled
[30820.886283] ACPI handle has no context!
[30820.932369] ata2: port disabled. ignoring.
[30820.932436] ata_piix 0000:00:1f.1: PCI INT C disabled
[30821.036503] HDA Intel 0000:00:1b.0: PCI INT B disabled
[30821.271797] e1000e 0000:00:19.0: PCI INT A disabled
[30821.271805] e1000e 0000:00:19.0: PME# enabled
[30821.271813] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[30821.284105] ACPI handle has no context!
[30821.323027] ricoh-mmc: Suspending.
[30821.323049] ricoh-mmc: Controller is now re-enabled.
[30821.324431] ACPI: Preparing to enter system sleep state S4
[30821.492098] PM: Saving platform NVS memory
[30821.499274] Disabling non-boot CPUs ...
[30821.499289] CPU0 attaching NULL sched-domain.
[30821.499292] CPU1 attaching NULL sched-domain.
[30821.524012] CPU0 attaching NULL sched-domain.
[30821.624016] CPU 1 is now offline
[30821.624019] SMP alternatives: switching to UP code
[30821.628819] Extended CMOS year: 2000
[30821.628911] PM: Creating hibernation image:
[30821.632011] PM: Need to copy 98374 pages
[30821.632011] PM: Normal pages needed: 64704 + 1024, available pages: 161464
[30821.632011] PM: Restoring platform NVS memory
[30821.632011] CPU0: Thermal monitoring enabled (TM2)
[30821.632011] Extended CMOS year: 2000
[30821.632011] Enabling non-boot CPUs ...
[30821.632011] SMP alternatives: switching to SMP code
[30821.633587] Booting processor 1 APIC 0x1 ip 0x6000
[30821.628756] Initializing CPU#1
[30821.628756] CPU: L1 I cache: 32K, L1 D cache: 32K
[30821.628756] CPU: L2 cache: 4096K
[30821.628756] CPU: Physical Processor ID: 0
[30821.628756] CPU: Processor Core ID: 1
[30821.628756] CPU1: Thermal monitoring enabled (TM2)
[30821.724037] CPU1: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b
[30821.724104] CPU0 attaching NULL sched-domain.
[30821.752019] CPU0 attaching sched-domain:
[30821.752021] domain 0: span 0-1 level MC
[30821.752023] groups: group c2803778 cpus 0 group c2a03778 cpus 1
[30821.752028] CPU1 attaching sched-domain:
[30821.752030] domain 0: span 0-1 level MC
[30821.752032] groups: group c2a03778 cpus 1 group c2803778 cpus 0
[30821.768151] CPU1 is up
[30821.769297] ACPI: Waking up from system sleep state S4
[30822.133127] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
[30822.165053] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[30822.165091] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[30822.173063] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
[30822.181061] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
[30822.189063] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
[30822.197060] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
[30822.205062] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[30822.213063] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[30822.213137] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[30822.221063] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[30822.229063] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[30822.237061] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[30822.245060] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[30822.253061] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[30822.261061] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[30822.269059] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[30822.277060] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[30822.285063] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[30822.293061] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[30822.293243] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
[30822.293293] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[30822.293564] iwl3945 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506)
[30822.293689] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xf (was 0x780010a, writing 0x580010a)
[30822.293717] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x3 (was 0x824000, writing 0x82a800)
[30822.309076] sdhci-pci 0000:15:00.2: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
[30822.309086] sdhci-pci 0000:15:00.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
[30822.309186] ricoh-mmc: Resuming.
[30822.309210] ricoh-mmc: Controller is now disabled.
[30822.377214] i915 0000:00:02.0: setting latency timer to 64
[30823.096641] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[30823.096649] e1000e 0000:00:19.0: PME# disabled
[30823.096781] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[30823.444291] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[30823.444342] usb usb3: root hub lost power or was reset
[30823.444368] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[30823.444414] usb usb4: root hub lost power or was reset
[30823.444449] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[30823.444457] usb usb1: root hub lost power or was reset
[30823.448350] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[30823.448800] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[30823.448808] HDA Intel 0000:00:1b.0: setting latency timer to 64
[30823.888315] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[30823.888351] usb usb5: root hub lost power or was reset
[30823.888371] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[30823.888407] usb usb6: root hub lost power or was reset
[30823.888430] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[30823.888471] usb usb7: root hub lost power or was reset
[30823.888492] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[30823.888497] usb usb2: root hub lost power or was reset
[30823.892378] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[30823.892901] pci 0000:00:1e.0: setting latency timer to 64
[30823.892914] ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
[30823.892923] ata_piix 0000:00:1f.1: setting latency timer to 64
[30823.892949] ahci 0000:00:1f.2: setting latency timer to 64
[30823.893097] ata2: port disabled. ignoring.
[30824.032119] sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[30824.032124] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[30824.492118] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[30824.493453] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[30824.493459] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[30824.493714] ata3.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[30824.493719] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[30824.496505] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[30824.496511] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[30824.496777] ata3.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[30824.496783] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[30824.498061] ata3.00: configured for UDMA/100
[30824.814032] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[30824.814034] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[30824.888116] sd 2:0:0:0: [sda] Starting disk
[30825.404059] usb 6-1: reset full speed USB device using uhci_hcd and address 2
[30825.548168] sierra 6-1:1.0: no reset_resume for driver sierra?
[30825.548286] sierra ttyUSB0: Sierra USB modem converter now disconnected from ttyUSB0
[30825.548357] sierra ttyUSB1: Sierra USB modem converter now disconnected from ttyUSB1
[30825.548424] sierra ttyUSB2: Sierra USB modem converter now disconnected from ttyUSB2
[30825.548447] sierra 6-1:1.0: device disconnected
[30825.660124] usb 6-2: reset full speed USB device using uhci_hcd and address 3
[30825.821477] thinkpad_acpi: ACPI backlight control delay disabled
[30825.913007] Registered led device: iwl-phy0::radio
[30825.913034] Registered led device: iwl-phy0::assoc
[30825.913059] Registered led device: iwl-phy0::RX
[30825.913083] Registered led device: iwl-phy0::TX
[30825.940242] sierra 6-1:1.0: Sierra USB modem converter detected
[30825.942247] usb 6-1: Sierra USB modem converter now attached to ttyUSB0
[30825.942308] usb 6-1: Sierra USB modem converter now attached to ttyUSB1
[30825.942373] usb 6-1: Sierra USB modem converter now attached to ttyUSB2
[30825.942553] PM: Image restored successfully.
[30825.942554] Restarting tasks ... done.
[30825.944606] PM: Basic memory bitmaps freed
[30852.344077] usb 3-1: new full speed USB device using uhci_hcd and address 3
[30852.512134] usb 3-1: New USB device found, idVendor=0a5c, idProduct=2110
[30852.512143] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[30852.512150] usb 3-1: Product: BCM2045B
[30852.512155] usb 3-1: Manufacturer: Broadcom Corp
[30852.512358] usb 3-1: configuration #1 chosen from 1 choice
[30862.912910] Registered led device: iwl-phy0::radio
[30862.912947] Registered led device: iwl-phy0::assoc
[30862.912974] Registered led device: iwl-phy0::RX
[30862.912999] Registered led device: iwl-phy0::TX
[30862.925649] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[30864.076393] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[30864.132160] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[30864.132824] ADDRCONF(NETDEV_UP): eth0: link is not ready
[30865.444949] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[30865.444957] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[30865.445471] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[30875.461239] eth0: no IPv6 routers present
[30895.257951] Registered led device: iwl-phy0::radio
[30895.258037] Registered led device: iwl-phy0::assoc
[30895.258075] Registered led device: iwl-phy0::RX
[30895.258125] Registered led device: iwl-phy0::TX
[30895.269718] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[30895.904661] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[30895.960363] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[30895.960946] ADDRCONF(NETDEV_UP): eth0: link is not ready
[30896.640627] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[30896.696236] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[30896.696773] ADDRCONF(NETDEV_UP): eth0: link is not ready
[30898.008973] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[30898.008982] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[30898.009491] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[30908.640232] eth0: no IPv6 routers present
[34597.360195] usb 2-2: new high speed USB device using ehci_hcd and address 4
[34597.497866] usb 2-2: New USB device found, idVendor=0951, idProduct=1643
[34597.497876] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[34597.497882] usb 2-2: Product: DataTraveler G3
[34597.497887] usb 2-2: Manufacturer: Kingston
[34597.497892] usb 2-2: SerialNumber: 001CC0EC34BBBB5145E2017B
[34597.498126] usb 2-2: configuration #1 chosen from 1 choice
[34598.084448] Initializing USB Mass Storage driver...
[34598.084714] scsi5 : SCSI emulation for USB Mass Storage devices
[34598.085102] usbcore: registered new interface driver usb-storage
[34598.085110] USB Mass Storage support registered.
[34598.086321] usb-storage: device found at 4
[34598.086327] usb-storage: waiting for device to settle before scanning
[34603.084279] usb-storage: device scan complete
[34603.115493] scsi 5:0:0:0: Direct-Access Kingston DataTraveler G3 PMAP PQ: 0 ANSI: 0 CCS
[34603.116636] sd 5:0:0:0: Attached scsi generic sg1 type 0
[34603.990255] sd 5:0:0:0: [sdb] 31236096 512-byte logical blocks: (15.9 GB/14.8 GiB)
[34603.991498] sd 5:0:0:0: [sdb] Write Protect is off
[34603.991503] sd 5:0:0:0: [sdb] Mode Sense: 23 00 00 00
[34603.991507] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[34603.994857] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[34603.994863] sdb: sdb1
[34604.015623] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[34604.015632] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[34605.856378] mount: sending ioctl 5310 to a partition!
[34605.856386] mount: sending ioctl 5310 to a partition!
[34605.884726] UDF-fs: No VRS found
[34605.884733] UDF-fs: Rescanning with blocksize 2048
[34605.912479] UDF-fs: No VRS found
[34605.912484] UDF-fs: No partition found (1)
[34606.008654] mount: sending ioctl 5310 to a partition!
[34606.008662] mount: sending ioctl 5310 to a partition!
[34606.064082] ISOFS: Unable to identify CD-ROM format.
[34643.966591] mount: sending ioctl 5310 to a partition!
[34643.966595] mount: sending ioctl 5310 to a partition!
[34643.993615] UDF-fs: No VRS found
[34643.993620] UDF-fs: Rescanning with blocksize 2048
[34644.021230] UDF-fs: No VRS found
[34644.021236] UDF-fs: No partition found (1)
[34644.021631] mount: sending ioctl 5310 to a partition!
[34644.021637] mount: sending ioctl 5310 to a partition!
[34644.063977] ISOFS: Unable to identify CD-ROM format.
[35100.740737] umount[16910]: segfault at 14 ip 0804ac4e sp bfc5e8f0 error 4 in umount[8048000+b000]
[35104.980718] umount[16914]: segfault at 14 ip 0804ac4e sp bfa0a5b0 error 4 in umount[8048000+b000]
[35132.657201] usb 2-2: USB disconnect, address 4
[40492.097062] CE: hpet increasing min_delta_ns to 40226 nsec
[45517.633080] usb 2-2: new high speed USB device using ehci_hcd and address 5
[45517.767725] usb 2-2: New USB device found, idVendor=090c, idProduct=1000
[45517.767734] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[45517.767741] usb 2-2: Product: Intenso Rainbow Line
[45517.767746] usb 2-2: Manufacturer: SMI Technology
[45517.767751] usb 2-2: SerialNumber: 11100700226898
[45517.767961] usb 2-2: configuration #1 chosen from 1 choice
[45517.770349] scsi6 : SCSI emulation for USB Mass Storage devices
[45517.770606] usb-storage: device found at 5
[45517.770610] usb-storage: waiting for device to settle before scanning
[45522.768313] usb-storage: device scan complete
[45523.260128] scsi 6:0:0:0: Direct-Access Intenso Rainbow PQ: 0 ANSI: 4
[45523.260997] sd 6:0:0:0: Attached scsi generic sg1 type 0
[45523.267484] sd 6:0:0:0: [sdb] 15605760 512-byte logical blocks: (7.99 GB/7.44 GiB)
[45523.268237] sd 6:0:0:0: [sdb] Write Protect is off
[45523.268244] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
[45523.268250] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[45523.270846] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[45523.270855] sdb: sdb1
[45523.276227] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[45523.276236] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[45523.774872] mount: sending ioctl 5310 to a partition!
[45523.774880] mount: sending ioctl 5310 to a partition!
[45523.824494] UDF-fs: No VRS found
[45523.824502] UDF-fs: Rescanning with blocksize 2048
[45523.867969] UDF-fs: No VRS found
[45523.867977] UDF-fs: No partition found (1)
[45523.868476] mount: sending ioctl 5310 to a partition!
[45523.868483] mount: sending ioctl 5310 to a partition!
[45523.929732] ISOFS: Unable to identify CD-ROM format.
[45524.039822] mount: sending ioctl 5310 to a partition!
[45524.039826] mount: sending ioctl 5310 to a partition!
[45524.075565] UDF-fs: No VRS found
[45524.075569] UDF-fs: Rescanning with blocksize 2048
[45524.119348] UDF-fs: No VRS found
[45524.119354] UDF-fs: No partition found (1)
[45524.119865] mount: sending ioctl 5310 to a partition!
[45524.119867] mount: sending ioctl 5310 to a partition!
[45524.181718] ISOFS: Unable to identify CD-ROM format.
[45574.181354] usb 2-2: USB disconnect, address 5
[45578.548058] usb 2-2: new high speed USB device using ehci_hcd and address 6
[45578.682821] usb 2-2: New USB device found, idVendor=090c, idProduct=1000
[45578.682830] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[45578.682837] usb 2-2: Product: Intenso Rainbow Line
[45578.682843] usb 2-2: Manufacturer: SMI Technology
[45578.682848] usb 2-2: SerialNumber: 11100700226898
[45578.683056] usb 2-2: configuration #1 chosen from 1 choice
[45578.683493] scsi7 : SCSI emulation for USB Mass Storage devices
[45578.683820] usb-storage: device found at 6
[45578.683825] usb-storage: waiting for device to settle before scanning
[45583.681375] usb-storage: device scan complete
[45584.173269] scsi 7:0:0:0: Direct-Access Intenso Rainbow PQ: 0 ANSI: 4
[45584.174190] sd 7:0:0:0: Attached scsi generic sg1 type 0
[45584.178320] sd 7:0:0:0: [sdb] 15605760 512-byte logical blocks: (7.99 GB/7.44 GiB)
[45584.179157] sd 7:0:0:0: [sdb] Write Protect is off
[45584.179165] sd 7:0:0:0: [sdb] Mode Sense: 43 00 00 00
[45584.179170] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[45584.183079] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[45584.183088] sdb: sdb1
[45584.186445] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[45584.186454] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[45585.023497] mount: sending ioctl 5310 to a partition!
[45585.023505] mount: sending ioctl 5310 to a partition!
[45585.068704] UDF-fs: No VRS found
[45585.068713] UDF-fs: Rescanning with blocksize 2048
[45585.113204] UDF-fs: No VRS found
[45585.113211] UDF-fs: No partition found (1)
[45585.113717] mount: sending ioctl 5310 to a partition!
[45585.113723] mount: sending ioctl 5310 to a partition!
[45585.175058] ISOFS: Unable to identify CD-ROM format.
[45585.239173] mount: sending ioctl 5310 to a partition!
[45585.239177] mount: sending ioctl 5310 to a partition!
[45585.292182] UDF-fs: No VRS found
[45585.292191] UDF-fs: Rescanning with blocksize 2048
[45585.339834] UDF-fs: No VRS found
[45585.339842] UDF-fs: No partition found (1)
[45585.340363] mount: sending ioctl 5310 to a partition!
[45585.340369] mount: sending ioctl 5310 to a partition!
[45585.401978] ISOFS: Unable to identify CD-ROM format.
[46062.362903] usb 2-2: USB disconnect, address 6
[46064.904083] usb 2-2: new high speed USB device using ehci_hcd and address 7
[46065.039009] usb 2-2: New USB device found, idVendor=090c, idProduct=1000
[46065.039018] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[46065.039024] usb 2-2: Product: Intenso Rainbow Line
[46065.039029] usb 2-2: Manufacturer: SMI Technology
[46065.039034] usb 2-2: SerialNumber: 11100700226898
[46065.039249] usb 2-2: configuration #1 chosen from 1 choice
[46065.040646] scsi8 : SCSI emulation for USB Mass Storage devices
[46065.040888] usb-storage: device found at 7
[46065.040892] usb-storage: waiting for device to settle before scanning
[46070.041335] usb-storage: device scan complete
[46070.534053] scsi 8:0:0:0: Direct-Access Intenso Rainbow PQ: 0 ANSI: 4
[46070.534978] sd 8:0:0:0: Attached scsi generic sg1 type 0
[46070.536875] sd 8:0:0:0: [sdb] 15605760 512-byte logical blocks: (7.99 GB/7.44 GiB)
[46070.537621] sd 8:0:0:0: [sdb] Write Protect is off
[46070.537629] sd 8:0:0:0: [sdb] Mode Sense: 43 00 00 00
[46070.537635] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[46070.540116] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[46070.540124] sdb: sdb1
[46070.543964] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[46070.543973] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[46070.837505] mount: sending ioctl 5310 to a partition!
[46070.837510] mount: sending ioctl 5310 to a partition!
[46070.882397] UDF-fs: No VRS found
[46070.882406] UDF-fs: Rescanning with blocksize 2048
[46070.929918] UDF-fs: No VRS found
[46070.929926] UDF-fs: No partition found (1)
[46070.930424] mount: sending ioctl 5310 to a partition!
[46070.930431] mount: sending ioctl 5310 to a partition!
[46070.999419] ISOFS: Unable to identify CD-ROM format.
[46071.122153] mount: sending ioctl 5310 to a partition!
[46071.122157] mount: sending ioctl 5310 to a partition!
[46071.170105] UDF-fs: No VRS found
[46071.170109] UDF-fs: Rescanning with blocksize 2048
[46071.215128] UDF-fs: No VRS found
[46071.215136] UDF-fs: No partition found (1)
[46071.215633] mount: sending ioctl 5310 to a partition!
[46071.215639] mount: sending ioctl 5310 to a partition!
[46071.287268] ISOFS: Unable to identify CD-ROM format.
[46087.096239] mount: sending ioctl 5310 to a partition!
[46087.096242] mount: sending ioctl 5310 to a partition!
[46087.142743] UDF-fs: No VRS found
[46087.142749] UDF-fs: Rescanning with blocksize 2048
[46087.188615] UDF-fs: No VRS found
[46087.188621] UDF-fs: No partition found (1)
[46087.189102] mount: sending ioctl 5310 to a partition!
[46087.189109] mount: sending ioctl 5310 to a partition!
[46087.263149] ISOFS: Unable to identify CD-ROM format.LG tk1908
Mittlerweile ist mein Problem gelöst. Im Endeffekt, lag es daran, dass ein Eintrag in der fstab quergeschossen hat.
Meine Lösung habe ich von hier: http://debianforum.de/forum/viewtopic.php?f=26&t=130499P.S Ja ich habe Debian auch von USB-Stick installiert, da mein T61 kein optisches Laufwerk hat.
-
Hallo Leute,
ich habe ein merkwürdiges Problem: Immer wenn ich einen Usb-Stick anstecke, sehe ich eine Fehlermeldung.
"Error mounting: mount exited with exit code 1: helper failed with:
mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so"
Könnte am ntfs Dateisystem liegen.
Kann es evtl ein fehlendes Paket sein?dmesg:
Spoiler anzeigen
[ 8.822552] iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 8.822573] iwl3945 0000:03:00.0: setting latency timer to 64
[ 8.895258] iwl3945 0000:03:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 8.895265] iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 8.895433] iwl3945 0000:03:00.0: irq 32 for MSI/MSI-X
[ 9.119719] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 9.175761] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 9.178640] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 9.179846] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 9.180862] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 9.182178] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 9.196898] [drm] initialized overlay support
[ 9.684978] Console: switching to colour frame buffer device 160x50
[ 9.696674] fb0: inteldrmfb frame buffer device
[ 9.696679] registered panic notifier
[ 9.702363] acpi device:01: registered as cooling_device2
[ 9.703466] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 9.703572] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 9.703679] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 9.703759] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 9.703768] hda_intel: probe_mask set to 0x1 for device 17aa:20ac
[ 9.703824] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 10.150335] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 11.144504] Adding 3969016k swap on /dev/sda5. Priority:-1 extents:1 across:3969016k
[ 11.403010] EXT3 FS on sda1, internal journal
[ 11.557893] loop: module loaded
[ 11.650890] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 12.795171] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 13.020069] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input9
[ 13.100623] fuse init (API version 7.13)
[ 14.732418] RPC: Registered udp transport module.
[ 14.732424] RPC: Registered tcp transport module.
[ 14.732429] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 15.056724] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 15.269845] svc: failed to register lockdv1 RPC service (errno 97).
[ 15.272504] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 15.305804] NFSD: starting 90-second grace period
[ 15.383354] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input10
[ 16.327463] apm: BIOS not found.
[ 16.955003] Bluetooth: L2CAP ver 2.14
[ 16.955009] Bluetooth: L2CAP socket layer initialized
[ 17.124064] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.124071] Bluetooth: BNEP filters: protocol multicast
[ 17.219585] Bridge firewalling registered
[ 17.685111] Bluetooth: RFCOMM TTY layer initialized
[ 17.685121] Bluetooth: RFCOMM socket layer initialized
[ 17.685126] Bluetooth: RFCOMM ver 1.11
[ 17.686921] Bluetooth: SCO (Voice Link) ver 0.6
[ 17.686926] Bluetooth: SCO socket layer initialized
[ 20.094430] lp: driver loaded but no devices found
[ 20.148839] ppdev: user-space parallel port driver
[ 29.363814] iwl3945 0000:03:00.0: firmware: requesting iwlwifi-3945-2.ucode
[ 29.540641] iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9
[ 29.610843] Registered led device: iwl-phy0::radio
[ 29.610889] Registered led device: iwl-phy0::assoc
[ 29.610934] Registered led device: iwl-phy0::RX
[ 29.610971] Registered led device: iwl-phy0::TX
[ 29.623003] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 35.597416] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[ 35.653143] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[ 35.653712] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 85.789160] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 85.789170] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 85.789665] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 95.836237] eth0: no IPv6 routers present
[ 121.401719] Registered led device: iwl-phy0::radio
[ 121.401765] Registered led device: iwl-phy0::assoc
[ 121.401806] Registered led device: iwl-phy0::RX
[ 121.401846] Registered led device: iwl-phy0::TX
[ 121.434492] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 122.128638] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[ 122.184355] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[ 122.184909] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 122.792479] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[ 122.848209] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[ 122.848743] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 124.185160] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 124.185169] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 124.185665] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 135.065032] eth0: no IPv6 routers present
[11035.323802] Monitor-Mwait will be used to enter C-3 state
[30783.916222] usb 3-1: USB disconnect, address 2
[30783.916513] btusb_intr_complete: hci0 urb f6339d80 failed to resubmit (19)
[30783.916533] btusb_bulk_complete: hci0 urb f6339000 failed to resubmit (19)
[30783.917519] btusb_bulk_complete: hci0 urb f6339300 failed to resubmit (19)
[30783.917984] btusb_send_frame: hci0 urb f5d36a80 submission failed
[30784.773861] Registered led device: iwl-phy0::radio
[30784.774150] Registered led device: iwl-phy0::assoc
[30784.774218] Registered led device: iwl-phy0::RX
[30784.774418] Registered led device: iwl-phy0::TX
[30784.810573] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[30785.533412] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[30785.589144] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[30785.589697] ADDRCONF(NETDEV_UP): eth0: link is not ready
[30785.827942] Registered led device: iwl-phy0::radio
[30785.827961] Registered led device: iwl-phy0::assoc
[30785.828037] Registered led device: iwl-phy0::RX
[30785.828053] Registered led device: iwl-phy0::TX
[30785.841890] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[30786.489393] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[30786.545150] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[30786.545687] ADDRCONF(NETDEV_UP): eth0: link is not ready
[30787.881909] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[30787.881912] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[30787.882097] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[30788.069629] PM: Marking nosave pages: 000000000009d000 - 0000000000100000
[30788.069634] PM: Basic memory bitmaps created
[30788.069635] PM: Syncing filesystems ... done.
[30788.088477] Freezing user space processes ... (elapsed 0.00 seconds) done.
[30788.089146] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[30788.089211] PM: Preallocating image memory...
[30798.040047] eth0: no IPv6 routers present
[30812.553181] e1000e: eth0 NIC Link is Down
[30820.247253] done (allocated 372544 pages)
[30820.247257] PM: Allocated 1490176 kbytes in 32.15 seconds (46.35 MB/s)
[30820.247259] Suspending console(s) (use no_console_suspend to debug)
[30820.885048] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[30820.886268] ACPI handle has no context!
[30820.886276] sdhci-pci 0000:15:00.2: PCI INT C disabled
[30820.886283] ACPI handle has no context!
[30820.932369] ata2: port disabled. ignoring.
[30820.932436] ata_piix 0000:00:1f.1: PCI INT C disabled
[30821.036503] HDA Intel 0000:00:1b.0: PCI INT B disabled
[30821.271797] e1000e 0000:00:19.0: PCI INT A disabled
[30821.271805] e1000e 0000:00:19.0: PME# enabled
[30821.271813] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[30821.284105] ACPI handle has no context!
[30821.323027] ricoh-mmc: Suspending.
[30821.323049] ricoh-mmc: Controller is now re-enabled.
[30821.324431] ACPI: Preparing to enter system sleep state S4
[30821.492098] PM: Saving platform NVS memory
[30821.499274] Disabling non-boot CPUs ...
[30821.499289] CPU0 attaching NULL sched-domain.
[30821.499292] CPU1 attaching NULL sched-domain.
[30821.524012] CPU0 attaching NULL sched-domain.
[30821.624016] CPU 1 is now offline
[30821.624019] SMP alternatives: switching to UP code
[30821.628819] Extended CMOS year: 2000
[30821.628911] PM: Creating hibernation image:
[30821.632011] PM: Need to copy 98374 pages
[30821.632011] PM: Normal pages needed: 64704 + 1024, available pages: 161464
[30821.632011] PM: Restoring platform NVS memory
[30821.632011] CPU0: Thermal monitoring enabled (TM2)
[30821.632011] Extended CMOS year: 2000
[30821.632011] Enabling non-boot CPUs ...
[30821.632011] SMP alternatives: switching to SMP code
[30821.633587] Booting processor 1 APIC 0x1 ip 0x6000
[30821.628756] Initializing CPU#1
[30821.628756] CPU: L1 I cache: 32K, L1 D cache: 32K
[30821.628756] CPU: L2 cache: 4096K
[30821.628756] CPU: Physical Processor ID: 0
[30821.628756] CPU: Processor Core ID: 1
[30821.628756] CPU1: Thermal monitoring enabled (TM2)
[30821.724037] CPU1: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b
[30821.724104] CPU0 attaching NULL sched-domain.
[30821.752019] CPU0 attaching sched-domain:
[30821.752021] domain 0: span 0-1 level MC
[30821.752023] groups: group c2803778 cpus 0 group c2a03778 cpus 1
[30821.752028] CPU1 attaching sched-domain:
[30821.752030] domain 0: span 0-1 level MC
[30821.752032] groups: group c2a03778 cpus 1 group c2803778 cpus 0
[30821.768151] CPU1 is up
[30821.769297] ACPI: Waking up from system sleep state S4
[30822.133127] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
[30822.165053] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[30822.165091] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[30822.173063] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
[30822.181061] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
[30822.189063] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
[30822.197060] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
[30822.205062] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[30822.213063] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[30822.213137] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[30822.221063] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[30822.229063] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[30822.237061] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[30822.245060] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[30822.253061] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[30822.261061] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[30822.269059] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[30822.277060] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[30822.285063] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[30822.293061] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[30822.293243] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
[30822.293293] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[30822.293564] iwl3945 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506)
[30822.293689] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xf (was 0x780010a, writing 0x580010a)
[30822.293717] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x3 (was 0x824000, writing 0x82a800)
[30822.309076] sdhci-pci 0000:15:00.2: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
[30822.309086] sdhci-pci 0000:15:00.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
[30822.309186] ricoh-mmc: Resuming.
[30822.309210] ricoh-mmc: Controller is now disabled.
[30822.377214] i915 0000:00:02.0: setting latency timer to 64
[30823.096641] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[30823.096649] e1000e 0000:00:19.0: PME# disabled
[30823.096781] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[30823.444291] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[30823.444342] usb usb3: root hub lost power or was reset
[30823.444368] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[30823.444414] usb usb4: root hub lost power or was reset
[30823.444449] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[30823.444457] usb usb1: root hub lost power or was reset
[30823.448350] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[30823.448800] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[30823.448808] HDA Intel 0000:00:1b.0: setting latency timer to 64
[30823.888315] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[30823.888351] usb usb5: root hub lost power or was reset
[30823.888371] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[30823.888407] usb usb6: root hub lost power or was reset
[30823.888430] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[30823.888471] usb usb7: root hub lost power or was reset
[30823.888492] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[30823.888497] usb usb2: root hub lost power or was reset
[30823.892378] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[30823.892901] pci 0000:00:1e.0: setting latency timer to 64
[30823.892914] ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
[30823.892923] ata_piix 0000:00:1f.1: setting latency timer to 64
[30823.892949] ahci 0000:00:1f.2: setting latency timer to 64
[30823.893097] ata2: port disabled. ignoring.
[30824.032119] sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[30824.032124] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[30824.492118] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[30824.493453] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[30824.493459] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[30824.493714] ata3.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[30824.493719] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[30824.496505] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[30824.496511] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[30824.496777] ata3.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[30824.496783] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[30824.498061] ata3.00: configured for UDMA/100
[30824.814032] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[30824.814034] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[30824.888116] sd 2:0:0:0: [sda] Starting disk
[30825.404059] usb 6-1: reset full speed USB device using uhci_hcd and address 2
[30825.548168] sierra 6-1:1.0: no reset_resume for driver sierra?
[30825.548286] sierra ttyUSB0: Sierra USB modem converter now disconnected from ttyUSB0
[30825.548357] sierra ttyUSB1: Sierra USB modem converter now disconnected from ttyUSB1
[30825.548424] sierra ttyUSB2: Sierra USB modem converter now disconnected from ttyUSB2
[30825.548447] sierra 6-1:1.0: device disconnected
[30825.660124] usb 6-2: reset full speed USB device using uhci_hcd and address 3
[30825.821477] thinkpad_acpi: ACPI backlight control delay disabled
[30825.913007] Registered led device: iwl-phy0::radio
[30825.913034] Registered led device: iwl-phy0::assoc
[30825.913059] Registered led device: iwl-phy0::RX
[30825.913083] Registered led device: iwl-phy0::TX
[30825.940242] sierra 6-1:1.0: Sierra USB modem converter detected
[30825.942247] usb 6-1: Sierra USB modem converter now attached to ttyUSB0
[30825.942308] usb 6-1: Sierra USB modem converter now attached to ttyUSB1
[30825.942373] usb 6-1: Sierra USB modem converter now attached to ttyUSB2
[30825.942553] PM: Image restored successfully.
[30825.942554] Restarting tasks ... done.
[30825.944606] PM: Basic memory bitmaps freed
[30852.344077] usb 3-1: new full speed USB device using uhci_hcd and address 3
[30852.512134] usb 3-1: New USB device found, idVendor=0a5c, idProduct=2110
[30852.512143] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[30852.512150] usb 3-1: Product: BCM2045B
[30852.512155] usb 3-1: Manufacturer: Broadcom Corp
[30852.512358] usb 3-1: configuration #1 chosen from 1 choice
[30862.912910] Registered led device: iwl-phy0::radio
[30862.912947] Registered led device: iwl-phy0::assoc
[30862.912974] Registered led device: iwl-phy0::RX
[30862.912999] Registered led device: iwl-phy0::TX
[30862.925649] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[30864.076393] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[30864.132160] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[30864.132824] ADDRCONF(NETDEV_UP): eth0: link is not ready
[30865.444949] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[30865.444957] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[30865.445471] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[30875.461239] eth0: no IPv6 routers present
[30895.257951] Registered led device: iwl-phy0::radio
[30895.258037] Registered led device: iwl-phy0::assoc
[30895.258075] Registered led device: iwl-phy0::RX
[30895.258125] Registered led device: iwl-phy0::TX
[30895.269718] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[30895.904661] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[30895.960363] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[30895.960946] ADDRCONF(NETDEV_UP): eth0: link is not ready
[30896.640627] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[30896.696236] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
[30896.696773] ADDRCONF(NETDEV_UP): eth0: link is not ready
[30898.008973] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[30898.008982] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[30898.009491] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[30908.640232] eth0: no IPv6 routers present
[34597.360195] usb 2-2: new high speed USB device using ehci_hcd and address 4
[34597.497866] usb 2-2: New USB device found, idVendor=0951, idProduct=1643
[34597.497876] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[34597.497882] usb 2-2: Product: DataTraveler G3
[34597.497887] usb 2-2: Manufacturer: Kingston
[34597.497892] usb 2-2: SerialNumber: 001CC0EC34BBBB5145E2017B
[34597.498126] usb 2-2: configuration #1 chosen from 1 choice
[34598.084448] Initializing USB Mass Storage driver...
[34598.084714] scsi5 : SCSI emulation for USB Mass Storage devices
[34598.085102] usbcore: registered new interface driver usb-storage
[34598.085110] USB Mass Storage support registered.
[34598.086321] usb-storage: device found at 4
[34598.086327] usb-storage: waiting for device to settle before scanning
[34603.084279] usb-storage: device scan complete
[34603.115493] scsi 5:0:0:0: Direct-Access Kingston DataTraveler G3 PMAP PQ: 0 ANSI: 0 CCS
[34603.116636] sd 5:0:0:0: Attached scsi generic sg1 type 0
[34603.990255] sd 5:0:0:0: [sdb] 31236096 512-byte logical blocks: (15.9 GB/14.8 GiB)
[34603.991498] sd 5:0:0:0: [sdb] Write Protect is off
[34603.991503] sd 5:0:0:0: [sdb] Mode Sense: 23 00 00 00
[34603.991507] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[34603.994857] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[34603.994863] sdb: sdb1
[34604.015623] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[34604.015632] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[34605.856378] mount: sending ioctl 5310 to a partition!
[34605.856386] mount: sending ioctl 5310 to a partition!
[34605.884726] UDF-fs: No VRS found
[34605.884733] UDF-fs: Rescanning with blocksize 2048
[34605.912479] UDF-fs: No VRS found
[34605.912484] UDF-fs: No partition found (1)
[34606.008654] mount: sending ioctl 5310 to a partition!
[34606.008662] mount: sending ioctl 5310 to a partition!
[34606.064082] ISOFS: Unable to identify CD-ROM format.
[34643.966591] mount: sending ioctl 5310 to a partition!
[34643.966595] mount: sending ioctl 5310 to a partition!
[34643.993615] UDF-fs: No VRS found
[34643.993620] UDF-fs: Rescanning with blocksize 2048
[34644.021230] UDF-fs: No VRS found
[34644.021236] UDF-fs: No partition found (1)
[34644.021631] mount: sending ioctl 5310 to a partition!
[34644.021637] mount: sending ioctl 5310 to a partition!
[34644.063977] ISOFS: Unable to identify CD-ROM format.
[35100.740737] umount[16910]: segfault at 14 ip 0804ac4e sp bfc5e8f0 error 4 in umount[8048000+b000]
[35104.980718] umount[16914]: segfault at 14 ip 0804ac4e sp bfa0a5b0 error 4 in umount[8048000+b000]
[35132.657201] usb 2-2: USB disconnect, address 4
[40492.097062] CE: hpet increasing min_delta_ns to 40226 nsec
[45517.633080] usb 2-2: new high speed USB device using ehci_hcd and address 5
[45517.767725] usb 2-2: New USB device found, idVendor=090c, idProduct=1000
[45517.767734] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[45517.767741] usb 2-2: Product: Intenso Rainbow Line
[45517.767746] usb 2-2: Manufacturer: SMI Technology
[45517.767751] usb 2-2: SerialNumber: 11100700226898
[45517.767961] usb 2-2: configuration #1 chosen from 1 choice
[45517.770349] scsi6 : SCSI emulation for USB Mass Storage devices
[45517.770606] usb-storage: device found at 5
[45517.770610] usb-storage: waiting for device to settle before scanning
[45522.768313] usb-storage: device scan complete
[45523.260128] scsi 6:0:0:0: Direct-Access Intenso Rainbow PQ: 0 ANSI: 4
[45523.260997] sd 6:0:0:0: Attached scsi generic sg1 type 0
[45523.267484] sd 6:0:0:0: [sdb] 15605760 512-byte logical blocks: (7.99 GB/7.44 GiB)
[45523.268237] sd 6:0:0:0: [sdb] Write Protect is off
[45523.268244] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
[45523.268250] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[45523.270846] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[45523.270855] sdb: sdb1
[45523.276227] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[45523.276236] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[45523.774872] mount: sending ioctl 5310 to a partition!
[45523.774880] mount: sending ioctl 5310 to a partition!
[45523.824494] UDF-fs: No VRS found
[45523.824502] UDF-fs: Rescanning with blocksize 2048
[45523.867969] UDF-fs: No VRS found
[45523.867977] UDF-fs: No partition found (1)
[45523.868476] mount: sending ioctl 5310 to a partition!
[45523.868483] mount: sending ioctl 5310 to a partition!
[45523.929732] ISOFS: Unable to identify CD-ROM format.
[45524.039822] mount: sending ioctl 5310 to a partition!
[45524.039826] mount: sending ioctl 5310 to a partition!
[45524.075565] UDF-fs: No VRS found
[45524.075569] UDF-fs: Rescanning with blocksize 2048
[45524.119348] UDF-fs: No VRS found
[45524.119354] UDF-fs: No partition found (1)
[45524.119865] mount: sending ioctl 5310 to a partition!
[45524.119867] mount: sending ioctl 5310 to a partition!
[45524.181718] ISOFS: Unable to identify CD-ROM format.
[45574.181354] usb 2-2: USB disconnect, address 5
[45578.548058] usb 2-2: new high speed USB device using ehci_hcd and address 6
[45578.682821] usb 2-2: New USB device found, idVendor=090c, idProduct=1000
[45578.682830] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[45578.682837] usb 2-2: Product: Intenso Rainbow Line
[45578.682843] usb 2-2: Manufacturer: SMI Technology
[45578.682848] usb 2-2: SerialNumber: 11100700226898
[45578.683056] usb 2-2: configuration #1 chosen from 1 choice
[45578.683493] scsi7 : SCSI emulation for USB Mass Storage devices
[45578.683820] usb-storage: device found at 6
[45578.683825] usb-storage: waiting for device to settle before scanning
[45583.681375] usb-storage: device scan complete
[45584.173269] scsi 7:0:0:0: Direct-Access Intenso Rainbow PQ: 0 ANSI: 4
[45584.174190] sd 7:0:0:0: Attached scsi generic sg1 type 0
[45584.178320] sd 7:0:0:0: [sdb] 15605760 512-byte logical blocks: (7.99 GB/7.44 GiB)
[45584.179157] sd 7:0:0:0: [sdb] Write Protect is off
[45584.179165] sd 7:0:0:0: [sdb] Mode Sense: 43 00 00 00
[45584.179170] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[45584.183079] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[45584.183088] sdb: sdb1
[45584.186445] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[45584.186454] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[45585.023497] mount: sending ioctl 5310 to a partition!
[45585.023505] mount: sending ioctl 5310 to a partition!
[45585.068704] UDF-fs: No VRS found
[45585.068713] UDF-fs: Rescanning with blocksize 2048
[45585.113204] UDF-fs: No VRS found
[45585.113211] UDF-fs: No partition found (1)
[45585.113717] mount: sending ioctl 5310 to a partition!
[45585.113723] mount: sending ioctl 5310 to a partition!
[45585.175058] ISOFS: Unable to identify CD-ROM format.
[45585.239173] mount: sending ioctl 5310 to a partition!
[45585.239177] mount: sending ioctl 5310 to a partition!
[45585.292182] UDF-fs: No VRS found
[45585.292191] UDF-fs: Rescanning with blocksize 2048
[45585.339834] UDF-fs: No VRS found
[45585.339842] UDF-fs: No partition found (1)
[45585.340363] mount: sending ioctl 5310 to a partition!
[45585.340369] mount: sending ioctl 5310 to a partition!
[45585.401978] ISOFS: Unable to identify CD-ROM format.
[46062.362903] usb 2-2: USB disconnect, address 6
[46064.904083] usb 2-2: new high speed USB device using ehci_hcd and address 7
[46065.039009] usb 2-2: New USB device found, idVendor=090c, idProduct=1000
[46065.039018] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[46065.039024] usb 2-2: Product: Intenso Rainbow Line
[46065.039029] usb 2-2: Manufacturer: SMI Technology
[46065.039034] usb 2-2: SerialNumber: 11100700226898
[46065.039249] usb 2-2: configuration #1 chosen from 1 choice
[46065.040646] scsi8 : SCSI emulation for USB Mass Storage devices
[46065.040888] usb-storage: device found at 7
[46065.040892] usb-storage: waiting for device to settle before scanning
[46070.041335] usb-storage: device scan complete
[46070.534053] scsi 8:0:0:0: Direct-Access Intenso Rainbow PQ: 0 ANSI: 4
[46070.534978] sd 8:0:0:0: Attached scsi generic sg1 type 0
[46070.536875] sd 8:0:0:0: [sdb] 15605760 512-byte logical blocks: (7.99 GB/7.44 GiB)
[46070.537621] sd 8:0:0:0: [sdb] Write Protect is off
[46070.537629] sd 8:0:0:0: [sdb] Mode Sense: 43 00 00 00
[46070.537635] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[46070.540116] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[46070.540124] sdb: sdb1
[46070.543964] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[46070.543973] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[46070.837505] mount: sending ioctl 5310 to a partition!
[46070.837510] mount: sending ioctl 5310 to a partition!
[46070.882397] UDF-fs: No VRS found
[46070.882406] UDF-fs: Rescanning with blocksize 2048
[46070.929918] UDF-fs: No VRS found
[46070.929926] UDF-fs: No partition found (1)
[46070.930424] mount: sending ioctl 5310 to a partition!
[46070.930431] mount: sending ioctl 5310 to a partition!
[46070.999419] ISOFS: Unable to identify CD-ROM format.
[46071.122153] mount: sending ioctl 5310 to a partition!
[46071.122157] mount: sending ioctl 5310 to a partition!
[46071.170105] UDF-fs: No VRS found
[46071.170109] UDF-fs: Rescanning with blocksize 2048
[46071.215128] UDF-fs: No VRS found
[46071.215136] UDF-fs: No partition found (1)
[46071.215633] mount: sending ioctl 5310 to a partition!
[46071.215639] mount: sending ioctl 5310 to a partition!
[46071.287268] ISOFS: Unable to identify CD-ROM format.
[46087.096239] mount: sending ioctl 5310 to a partition!
[46087.096242] mount: sending ioctl 5310 to a partition!
[46087.142743] UDF-fs: No VRS found
[46087.142749] UDF-fs: Rescanning with blocksize 2048
[46087.188615] UDF-fs: No VRS found
[46087.188621] UDF-fs: No partition found (1)
[46087.189102] mount: sending ioctl 5310 to a partition!
[46087.189109] mount: sending ioctl 5310 to a partition!
[46087.263149] ISOFS: Unable to identify CD-ROM format.LG tk1908
-
Jeder Prozessor seit dem Pentium Pro (mit den ersten Pentium M als Ausnahme) kann das in der Theorie. Was du in diesem Fall siehst, ist hingegen ein PAE-fähiger Linux-Kernel.
Klar.
Ich dachte nur, dass das System auf shadowtux screenshot ein Ubuntu 12.04 ist, folglich war ich etwas irritiert, da (wie ihr beide schon gesagt habt), der Pentium M, welcher ja neuer als der P3 ist, kein PAE kann.Btw. Hab ich recht, und das ist n Ubuntu 12.04?
-
Sehe ich das richtig, dass der P3 PAE kann?
-
In der Tat kann ich das verstehen. Ich setze es aber auch beruflich ein. Bei uns gibt es garkeine Windows-Workstations in der Firma. Alles Linux.Ich würd gerne bei euch arbeiten.
Mir war es freigestellt, welches System ich verwende. Folglich bin ich zu Linux gegangen, womit ich auch alles machen kann was ich brauch. (Vom Sharepoint mal abgesegen.)Wobei wir der lebende Beweis sind, dass man auch mit einer (fast) reinen Windows - Infrastruktur (Wir haben nur nen Xen-Server für unseren MS Sharepoint und unsere Firewalls mit IPcop und Slackware), gut arbeiten kann.
Wobei, wir haben auch noch n paar Mac Clients. -
Mittlerweile gibt es bei mir noch einen zusätzlichen Grund:
Linux (Debian auf meinem Thinkpad T61) hilft mir bei meiner Arbeit. (Administration/Systemintegration). Ich glaub shadowtux versteht mich in diesem Fall. -
Ich glaube, du fährst am einfachsten, wenn du LAN und WLAN-Schnittstelle bridgest. Such mal nach brctl.Habs ausprobiert, aber brctl mag scheinbar meine WLAN-KArte (FritzStick) net.
-
Such einfach shadowtux' DSL-Router-Tutorial und nimm nur das RoutingskriptSchon ausprobiert. Geht nicht. Ich schau grade mal auf meinem TP, da habe ich noch ne Anleitung.
-
Hallo Leute,
ich habe heute n besonderes Problem.
Die Ausgangslage:
Mein PC ist per WLAN mit unserer Fritz! Box Fon WLAN 7240 verbunden.
Unter Debian wlan1.
Ebenfalls ist mein PC per LAN (eth0) mit einer Arcor EasyBox A600 verbunden, welche aber keinen Zugriff auf dass Internet bekommt. An der Easy Box, hängt noch mein Thin Client mit Debian.
Der TC besitzt nur die Netzwerkschnittstelle eth0.Nun möchte ich, dass mein TC irgendwie Internetzugriff bekommt, ohne physich (egal ob per WLAN oder LAN) an die Fritz Box angeschlossen sein muss.
Ist das irgendwie möglich?Gruß tk1908
