VMware Workstation Pro 12.5.2

Es ist ein neues Problem aufgetreten. Ich habe viele Windows-VMs ab Windows Server 2008 32 Bit und die VMWare Tools installiert, Version 10.10.

Ich kann die VM nach dem Neustart nicht automatisch die Auflösung ändern, also: wenn ich das VMware-Fenster kleiner oder größer mache, die Auflösung geht nicht automatisch mit.

Was ist da los?

Der Grafikkartentreiber ist VMware SVGA 3D.

Was ist der Fehler?

Die VMware Tools neu zu installieren, bzw. zu deinstallieren und dann erneut zu installieren bringt gar nichts.

hier ist noch meine VMWare Konfigurationsdatei, der Inhalt davon, es scheint, es ist alles richtig eingetragen.

.encoding = "windows-1252"
config.version = "8"
virtualHW.version = "12"
numvcpus = "2"
cpuid.coresPerSocket = "2"
scsi0.present = "TRUE"
scsi0.virtualDev = "lsisas1068"
sata0.present = "TRUE"
memsize = "2048"
mem.hotadd = "TRUE"
sata0:0.present = "TRUE"
sata0:0.fileName = "G:\Windows 8.1 Pro x64.vmdk"
sata0:1.present = "TRUE"
sata0:1.autodetect = "TRUE"
sata0:1.deviceType = "cdrom-raw"
ethernet0.present = "TRUE"
ethernet0.connectionType = "nat"
ethernet0.virtualDev = "e1000e"
ethernet0.wakeOnPcktRcv = "FALSE"
ethernet0.addressType = "generated"
usb.present = "TRUE"
ehci.present = "TRUE"
ehci.pciSlotNumber = "34"
usb_xhci.present = "TRUE"
sound.present = "TRUE"
sound.virtualDev = "hdaudio"
sound.fileName = "-1"
sound.autodetect = "TRUE"
mks.enable3d = "TRUE"
svga.graphicsMemoryKB = "1048576"
serial0.present = "TRUE"
serial0.fileType = "thinprint"
pciBridge0.present = "TRUE"
pciBridge4.present = "TRUE"
pciBridge4.virtualDev = "pcieRootPort"
pciBridge4.functions = "8"
pciBridge5.present = "TRUE"
pciBridge5.virtualDev = "pcieRootPort"
pciBridge5.functions = "8"
pciBridge6.present = "TRUE"
pciBridge6.virtualDev = "pcieRootPort"
pciBridge6.functions = "8"
pciBridge7.present = "TRUE"
pciBridge7.virtualDev = "pcieRootPort"
pciBridge7.functions = "8"
vmci0.present = "TRUE"
hpet0.present = "TRUE"
usb.vbluetooth.startConnected = "TRUE"
sensor.accelerometer = "pass-through"
sensor.ambientLight = "pass-through"
sensor.compass = "pass-through"
sensor.gyrometer = "pass-through"
sensor.inclinometer = "pass-through"
sensor.location = "pass-through"
sensor.orientation = "pass-through"
displayName = "Windows 8.1 Pro"
guestOS = "windows8"
nvram = "Windows 8.nvram"
virtualHW.productCompatibility = "hosted"
powerType.powerOff = "soft"
powerType.powerOn = "soft"
powerType.suspend = "soft"
powerType.reset = "soft"
extendedConfigFile = "Windows 8.vmxf"
gui.lastPoweredViewMode = "fullscreen"
numa.autosize.vcpu.maxPerVirtualNode = "2"
numa.autosize.cookie = "20001"
uuid.bios = "56 4d 83 ea 14 d4 59-ac 9d 15 20 0f 15 e3 71"
uuid.location = "56 4d 83 ea 14 d4 59-ac 9d 15 20 0f 15 e3 71"
migrate.hostlog = ".\Windows 8-b8bce0c8.hlog"
sata0:0.redo = ""
pciBridge0.pciSlotNumber = "17"
pciBridge4.pciSlotNumber = "21"
pciBridge5.pciSlotNumber = "22"
pciBridge6.pciSlotNumber = "23"
pciBridge7.pciSlotNumber = "24"
scsi0.pciSlotNumber = "160"
usb.pciSlotNumber = "32"
ethernet0.pciSlotNumber = "192"
sound.pciSlotNumber = "33"
usb_xhci.pciSlotNumber = "224"
vmci0.pciSlotNumber = "35"
sata0.pciSlotNumber = "36"
scsi0.sasWWID = "50 05 05 6a 14 d4 50"
ethernet0.generatedAddress = "00:0c:29:15:e3:71"
ethernet0.generatedAddressOffset = "0"
vmci0.id = "253092721"
vm.genid = "2045890009897871342"
vm.genidX = "-2196419425660073453"
monitor.phys_bits_used = "42"
vmotion.checkpointFBSize = "4194304"
vmotion.checkpointSVGAPrimarySize = "33554432"
cleanShutdown = "TRUE"
softPowerOff = "TRUE"
usb_xhci:6.speed = "2"
usb_xhci:6.present = "TRUE"
usb_xhci:6.deviceType = "hub"
usb_xhci:6.port = "6"
usb_xhci:6.parent = "-1"
usb_xhci:7.speed = "4"
usb_xhci:7.present = "TRUE"
usb_xhci:7.deviceType = "hub"
usb_xhci:7.port = "7"
usb_xhci:7.parent = "-1"
svga.guestBackedPrimaryAware = "TRUE"
tools.syncTime = "TRUE"
sata0:1.startConnected = "TRUE"
toolsInstallManager.lastInstallError = "0"
toolsInstallManager.updateCounter = "3"
tools.remindInstall = "FALSE"
gui.applyHostDisplayScalingToGuest = "TRUE"
floppy0.present = "FALSE"
usb_xhci:4.present = "TRUE"
usb_xhci:4.deviceType = "hid"
usb_xhci:4.port = "4"
usb_xhci:4.parent = "-1"
gui.exitOnCLIHLT = "TRUE"

Zitat von Semih

Oben in Menüleiste "View" unter Autosize einfach von "Center Guest" auf "Autofit Guest" umstellen.

Danke Dir, das war der Fehler, aber wieso so kompliziert, und wieso kann das die VMware Tools nicht automatisch einstellen?

Kann man VMware beibringen, dass es das automatisch macht, diese Einstellung festzulegen?
Oder ist es jetzt automatisch eingestellt?
Vor dem Festplattentod ging das doch auch automatisch. Komisch das alles.